New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft.
Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.
FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or 4 DOOR MODELS.
This OEM Front Flange Style Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37" Tall Tires after that size we Recommend you upgrading to our [Extreme Duty 1350 Solid Non Greaseable Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement. Please note: If you have a Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.
- Front Driveshaft Part# ASDJK-1310F-S
- Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
- Has Long Full Spline Slip n Stub unlike some of our Competitors.
- Built only with Components made by Spicer and Neapco.
- Has the Strongest Non Greaseable U-joints on the Market.
- Has a Heavy Duty Flange on it that fits your OEM Pinion Flange so it is Easier to install and you won't need to Disturb the Crush Sleeve.
- Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
This Item will include the following parts as Pictured up Top:
 2" X .120 Wall Extreme Duty 1310 CV Driveshaft with Solid Non Greasable U-joints, With a OEM Style Flange. Lifetime Warranty if you twist our tube or break a weld due to Torque.
 American Made Front 1310 Transfer Case Output Shaft Yoke.
 Grade 10 CV bolts.
Driveshaft comes painted Gloss Black Show Quality.