EVO MFG Double D Pro Suspension JK/JKU
EVO MFG Front LCG Bolt on Coilover Kit
EVO MFG Draglink Flip Kit
EVO MFG Double D Bolt on Long Arm Upgrade
EVO MFG Rear LCG Bolt on Coilover Kit
The EVO MFG Front and Rear LCG Bolt-On Coilover kits come complete with all necessary parts to easily convert the JK from the limited coil and shock system to a far superior performing coilover system. 12”’s of usable wheel travel, custom built brackets for the lowest center of gravity, EVO’s legendary SPEC valving and spring rates specifically dialed in for the JK to yield excellent handling. The EVO MFG LCG Bolt-On Coilover system proves to set the bar, for ease of install, price and performance. LCG 3”-5” recommended lift height, fully adjustable minimal drilling/cutting required, fully bolt-on Hi Clearance design. Retains all factory rear exhaust system as well as factory front and rear swaybars.
The EVO MFG Draglink Flip Kit raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK. Roll center is greatly improved giving better handling/ steering response of the vehicle on and off road. The EVO MFG Drag Link Flip Kit features an improved steering stabilizer mounting location to get it up and out of harm’s way above the tie rod.
The EVO MFG Double D Bolt-On Long Arm Upgrade kit features the EVO MFG Adjustors, full on car adjustability of control arm length, proven Currie Johnny Joints are used on both ends of each arm, rebuildable, greaseable, and isolated construction for decreased transmission of road vibrations, the ability to retain the factory high clearance transmission cross-member, and the kit is a complete bolt-on installation. (welding is optional)
High Clearance Fenders Recommended. Suspension system fits all year and model Jeep Wrangler JK/JKUs
2Door JK: Front (or exhuast spacer kit) and rear aftermarket driveshaft required. (not included)
4Door JKU: Front aftermarket driveshaft or exhaust spacer required, rear driveshaft recommended. (not included)
Recommended wheel backspacing 3.75” or less (smaller backspacing #). Exhaust modifactions required on 2010+ JK/JKUs