1. Home
  2. Suspension
  3. EVO MFG JL 3.5" ENFORCER OVERLAND LIFT STAGE 3 WITH EVO SPEC KING SHOCKS

EVO MFG JL 3.5" ENFORCER OVERLAND LIFT STAGE 3 WITH EVO SPEC KING SHOCKS

0 Review(s) Write a Review
Your Price: $3,998.55
Retail Price:$4,398.41
You Save:$399.86(9%)
Part Number: EVO-3014S3K
Availability: In Stock.

The EVO MFG 3.5” JL Enforcer Lift Suspension Systems lift your 2018+ 
Jeep Wrangler JL 3.5”s.  Our main goal in developing this kit was to 
give a performance ride on and off road while giving added vehicle 
lift.  The JL Enforcer kits are specifically designed to lift your JL 
and maintain a performance spring rate, smooth ride quality while having 
the option of retaining factory shocks, maintaining wheel travel with 
use of shock extensions (part number EXT kits) or without shock 
extensions to allow for use of your choice of aftermarket 3-5” lift 
shocks or use of our EVO SPEC 2.5” Remote Reservoir King Shocks. These 
kits come with a set of 3.5” lift springs specific to each corner which 
will keep the Jeep Wrangler JL level side to side. EVO MFG JL Enforcer 
kits are available in multiple configurations to suit your needs and 
budget and are upgradable down the road.  3.5” kits come with raised 
rear trackbar track to center axle and correct roll center for improved 
handling.  What are the JL Enforcer OVERLAND Systems, EVO-3012 Kits?  
The difference with EVO MFG Enforcer Overland systems (EVO-3012s) vs EVO 
MFG Enforcer systems (EVO-3011s) is the use of front Overland Control 
Arm Brackets.  When lifting your vehicle your control arms at ride 
height have a steeper angle towards the floor which can have some 
negative effect/chop in ride quality.  With the use of the included 
Overland Control Arm brackets we relocate the front control arm mounting 
locations at the frame.  In doing this when lifted we maintain factory 
flatter control arm angles and while minimal, we alleviate much of the 
chop associated with lifting a Jeep giving even better and more improved 
ride quality.  Also, in the use of Overland Drop Brackets we are able to 
engineer more performance into the front suspension to improve braking 
and driveline angles through suspension cycle.  Both kits drive very 
well, the Overland Kits are better suited for less hard off-road 
crawling and more light off road and on road use.  The EVO MFG 3.5" JL 
Enforcer Kits are easy to install using normal tools. No drilling or 
cutting (optional rear shock extensions require one minor drill). They 
require no driveshaft or exhaust modifications (your shock choice may 
require this, contact manufacturer to be sure). Simple Bolt on 
installation.  3.5” lift is based on increase of a 4 Door Rubicon.  4 
Door Sport and Sahara Models will see slightly higher increases over 
stock and will match overall lift height of a Rubicon Model.  2 Door 
Models (all) will see slightly higher increases in lift.  Increases will 
vary.  Stage 1 kits includes all the necessary parts to lift your JL 
3.5”s.  Stage 2 kits includes Stage 1 components as well as EVO MFG 
Enforcer JL Front Lower Adjustable Control Arms to allow for caster 
adjustments. Stage 3 Kits includes stage 2 components as well as EVO MFG 
Enforcer rear upper adjustable control arms for rear pinion angle 
adjustment Stage 4 kits includes stages 1 components with all 8 EVO MFG 
Enforcer control arms for full front and rear axle adjustments.  *All 
part number “EXT” kits include front and rear shock extensions. “K” Kits 
include EVO SPEC King Shocks. Retaining factory shocks while maintaining 
full wheel travel.  Note:  Depending on actual tire variances and sizes, 
Some trimming of body sheet metal, fenders, bumpers and inner fender 
liner may be required with stated tire sizes to fully clear under 
compression. 

 All 3.5" JL Enforcer its require wheel spacers or aftermarket wheels with smaller backspacing.  Adjustable Front Trackbar is required to complete proper installation, not included.

INSTALLATION TIME 7-9 HOURS

Related Items

EVO ENFORCER 4
(0)
$1,418.99
In Stock.

Recently Viewed Items