EVO MFG HD Sway Bar Links
* EVO-1036-5.5 Length range: 5.5"- 6.9"
* EVO-1036-7.5 Length Range: 7.5"- 8.9"
* EVO-1036-9.5 Length Range: 9.5"- 10.9"
* EVO-1036-10.5 Length Range: 10.5" - 11.9"
* EVO-1036-12.5 Length Range: 12.5" - 13.9"
* EVO-1036-13.5 Length Range: 13.5" - 14.9"
* EVO-1036-14.5 Length Range: 14.5" - 15.9"
* EVO-1036-16.5 Length Range: 16.5" - 17.9"
2007-2018 Jeep Wrangler JK/JKU's use EVO-1036 sets on the front and rear
2018-2020 Jeep Wrangler JL/JLU's use EVO3136 set on the front swaybar and
EVO-1036 set on the rear swaybar
2020 Jeep Gladiator JT use EVO3136 set on the front swaybar and EVO-3137 set
on the rear swaybar.
EVO HD Sway Bar End Links are made of solid hex bar and are adjustable in
length within the specified ranges above. They come complete with rod ends,
3/4" hex bar linkages and all necessary hardware. Sold in set of two
For Front Jeep JK/JKU.JL/JLU/JT Gladiator applications, drilling of the
factory front swaybar existing hole to 1/2" is required.
Use these to beef up the very important component of your suspension system,
These can also be used to help alleviate some leaning to one side which is a
common problem on many vehicles.
(Note: Measurements above are center bolt to center bolt. If the links you
need measure to be within the length gap, Common suggestion is use the
INSTALLATION TIME 1 HOUR