Jeep JT Gladiator 2.5" Enforcer Overland Stage 4 w/ EVO SPEC KING Shocks
The EVO MFG 2.5” Jeep Gladiator JT Enforcer Suspension Systems lift your2020+ Jeep Gladiator JT 2.5”s. The JT Enforcer kits are specificallydesigned and engineered to lift your JL and maintain a performancespring rate, smooth ride quality all while retaining tow capacities. These kits allow for use of your choice of any aftermarket 2.5-5” liftshock or use of our EVO SPEC tuned 2.5” Remote Reservoir King Shocks.These kits come with a set of 2.5” lift springs specific to each cornerwhich will keep the Jeep Gladiator JT level side to side. The differencewith EVO MFG Enforcer Overland systems vs EVO MFG Enforcer systems isthe use of front Overland Control Arm Brackets. When lifting yourvehicle your control arms at ride height have a steeper angle towardsthe floor which can have some negative effect/chop in ride quality. With the use of the included Overland Control Arm brackets we relocatethe front control arm mounting locations at the frame. In doing thiswhen lifted we maintain factory flatter control arm angles and whileminimal, we alleviate much of the chop associated with lifting a Jeepgiving even better and more improved ride quality. Also, in the use ofOverland Drop Brackets we are able to engineer more performance into thefront suspension to improve braking and driveline angles throughsuspension cycle. Both kits drive very well, the Overland Kits arebetter suited for less hard off-road crawling and more light off roadand on road use. The EVO MFG 2.5" JT Enforcer Kits are easy to installusing normal tools. No drilling or cutting. They require no driveshaftor exhaust modifications. Simple Bolt on installation. EVO MFG JTEnforcer kits are available in multiple configurations to suit yourneeds and budget and are upgradable down the road. Stage 1 kitsincludes all the necessary parts to lift your JT 2.5”s. Stage 2 kitsincludes Stage 1 components as well as EVO MFG Enforcer Front LowerAdjustable Control Arms to allow for caster adjustments. Stage 3 Kitsincludes stage 2 components as well as EVO MFG Enforcer rear upperadjustable control arms for rear pinion angle adjustment. Stage 4 kitsincludes stages 1 components with all 8 EVO MFG Enforcer control armsfor full front and rear axle adjustments. All included Enforcer Armsuse only rebuild able free articulating spherical bearings on all endsof each arm giving restriction free travel and articulation. Theincluded Enforcer arms are manufactured from large diameter, thick DOMSteel Tubing for ultimate in strength and longevity both on and off thetrail. These kits require wheel spacers or aftermarket wheels withsmaller backspacing. Front and rear adjustable track bars to fine tuneaxle center are included with PLUS “P” kits. “K” Kits include a set of4 EVO SPEC King Shocks.
Front aftermarket driveshaft is not required when equipped with EVO Spec King Shocks
Recommended Labor Time 9-11 Hours