The BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories.
Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab, or tapping into the vehicle's electrical system. It's the perfect overall solution for all your aftermarket electrical accessories, with options unmatched by anyone.
Note: JT/JL with diesel engine and the Jeep Wrangler 4XE require a special bracket.
Note: This system will not fit the Jeep Wrangler 392 V8.
Features:Fully programmable, digital controlled system8 circuits rated at 30 amps at 12.5 VDC per circuit16-position terminal block (easily attach accessories)2 controller ports (RJ45) for Ethernet cablesIntegrated low voltage cutoff (LVCO) battery protection w/ optional overrideOne ATM mini-style fuse for LVCO protection and resetFailsafe self-healing fault protection system (from 1.5 to 30amps)Current-sensing MOSFETs are controlled by a microprocessor (no fuses and relays)50amp auto-resetting circuit breakerNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacketOperates on 12VDC or 24VDC 8-position input terminal block for controlling outputsBuilt-in Bluetooth capabilities for remote controlProtection against: overheating, over-current, shorts, reverse polarity and field collapseIgnition control and safety lock-out for switches 1 and 2 (optional)On-demand wireless software updates/upgrades
Hardware:Powder-coated steel base with built-in hardwareSilicone gasket for weatherproofingSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placementUniversal and vehicle-specific mounting optionsRobust insulated base and cover
Each switch can be programmed for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road mode of operation
The following features are only available through the purchase of our Pro-Series Mobile App:Circuit timersSwitch lockoutThe initial startup current for each circuit is raised to 65amps for 5 secondsProgram any circuit to be always on while still maintaining fault protectionOption to disable deep sleep modeSelectable auto restart after circuit shuts down from over current/shortProgrammable Current Limiting (in 2amp increments up to 30amps)Selectable auto restart for current limiting shut downSelectable Latch or Momentary actions for inputsProgrammable ignition control for all 8 circuitsVariable strobe function to create custom flash/strobe patterns
HD Control Panel:Encased in an aluminum billet machined housing, powder coated black, utilizing tactile switches encapsulated in silicone.Silicone Buttons with positive touch feedback.Panel is designed to withstand the harshest environments with all weather conditions considered.Compact in size: 2-7/8W x 4-7/8L x 1/2 Thick (smaller than an iPhone).Universal back with two pressed-in 1/4-20 studs x 5/8 inches long for flat mounting.Standard universal articulating mount for a multitude of mounting options.One standard RJ45 jack on the back for communication cable between HD panel and the BantamX. (HD comes with a 10-foot CAT-6 Ethernet cable)HD can be located up to 25 feet from the Source using a standard CAT-6 Ethernet cable.Built-in Bluetooth LE allows you to program and control our system with iPhones, iPad, and iPad Mini using the free sPOD app.Three levels of secured or open Bluetooth pairing/connectivity.Each switch is programmable for dimming, flash, momentary, strobe, and switch linking (program any switch to be a master to control other switches).All 8 switches are backlit.Adjustable timer to turn the backlight off and a simple touch on any switch to reactivate.Quickly turn the backlight off by holding 2 designated buttons.RGB backlight color and intensity can be changed to any color to match vehicle interior dash lighting.Panel lock-out feature for safety and security.Legends can be applied (comes standard with one sheet of 72 legends).Each switch has 3 status lights: Red (left) = On, White (center) = Flash/Strobe active, Blue (right) = Active visual feedback when button is pushed.Status lights can be dimmed.Additional HD smart controller can be added for different locations.HD can run in conjunction with our Touchscreen, Bluetooth and 8 Switch panel.